loading

The RT6541D PWM controller provides high efficiency, excellent transient response, and high DC output accuracy needed for stepping down high voltage batteries to generate low voltage 0.77V.

The constant-on-time PWM control scheme handles wide input/output voltage ratios with ease and provides 100ns "instant-on" response to load transients while maintaining a relatively constant switching frequency.

The RT6541D achieves high efficiency at a reduced cost by eliminating the current-sense resistor found in traditional current-mode PWMs. Efficiency is further enhanced by its ability to drive very large synchronous rectifier MOSFETs and enter diode emulation mode at light load condition. The buck conversion allows this device to directly step down high voltage batteries at the highest possible efficiency.

The RT6541D is available in a WDFN-14L 3x2 package.

Applications

  • Notebook Computers
  • Generic DC-DC Power Regulator
Key Spec.
RT6541D
Status Active
Vs (typ) (V) 5
Vin (min) (V) 3
Vin (max) (V) 26
Vout (min) (V) 0.77
Output Adj. Method Fixed
Accuracy (+/- %) 1
Freq (typ) (kHz) 560
Iq (typ) (mA) 0.14
Ext Sync No
Features Adjustable Current Limit;Built-in Bootstrap Switch;COT Control;Cycle-by-Cycle Current Limit;Diode Emulation Mode;Enable Input;OCP;OVP;PSM;Power Good;UVP
Package Type WDFN3x2-14
Features
  • Built-in 1% Reference Voltage
  • 4700ppm/°C Programmable Current Limit by Low- Side RDS(ON) Sensing
  • 3V to 26V Battery Input Range
  • Drives Large Synchronous Rectifier FETs
  • Integrated Boost Switch
  • Over/Under-Voltage Protection
  • Thermal Shutdown
  • Power Good Indicator
  • RoHS Compliant and Halogen Free
  • Tiny 14-Lead WDFN Package
Datasheet
TitleLast UpdateDownload
High Efficiency Single Synchronous Buck PWM Controller2022/05/23
TOP